ANT1-C series surge protective device appliced in C grade lighting-proof, installed on the joint of LPZ1,LPZ2 and LPZ3, usually installed in household distribution boards,computer equipment , information equipment , electronic equipment and in the socket box in front of control equipment or near the control equipment.
Techical Parameters |
ANT1-C |
N-PE |
|||||||||||||||
Rated Operating Voltage Uc(V~) |
110V |
220V |
380V |
220V |
380V |
220V |
380V |
||||||||||
Maximum Continuous Operating Voltage Uc(V~) |
140V |
275V |
320V |
385V |
420V |
440V |
275V |
320V |
385V |
420V |
440V |
255V |
|||||
Voltage Protection Level Up(V~)KV |
≤0.8 |
≤1.2 |
≤1.5 |
≤1.8 |
≤2.0 |
≤2.2 |
≤1.0 |
≤1.4 |
≤1.5 |
≤1.8 |
≤2.0 |
≤1.0 |
≤1.8 |
||||
Nominal Discharge Current In(8/μ 20μ s)KA |
20 |
15 |
20 |
40 |
60 |
||||||||||||
Maximum Discharge Current Imax(8/μ 20μ s)KA |
40 |
30 |
|||||||||||||||
Response Time ns |
<25 |
||||||||||||||||
Test Standard |
GB18802,IEC61643-1 |
||||||||||||||||
The Cross Section of L/N line |
10,16 |
10 |
|||||||||||||||
The Cross Section of P/E line |
10,25 |
16 |
|||||||||||||||
Fuse or Switch(A) |
32A |
25A,32A |
|||||||||||||||
Operating Environment(℃) |
-40℃~+85℃ |
||||||||||||||||
Relative Humidity |
≤95% |
||||||||||||||||
Installation |
Stanard Rail 35mm |
||||||||||||||||
Material of Outer Covering |
Fiber glass reinforced plastic |